0
THRU-HOLE POWER CHUCK
Thru-Hole | 2-JAW
  • WEDGE-HOOK type 2-jaw with the through-hole.
  • Matching surfaces of all parts hardened, ground and lubricated directly.
  • High rigidity and high repeatability precision.
  1. J is the hole diameter of blank draw nut.
  2. If not notified, AUTOGRIP will adopt the K Default as K value.
  3. K is the maximum thread specification and it could be customize.
Model-Plunger
stroke
(mm)
Jaw stroke
(Dia.)
(mm)
Chucking
Dia. Max.
(mm)
Chucking
Dia. Min.
(mm)
Max. D.B.
pull kN
(kgf)
Max.
clamping
force kN
(kgf)
Max. speed
min-1 (r.p.m.)
I
kg‧m 2
Weight
(kg)
Weight
(kg)
Matching cyl.Max. pressure
MPa (kgf/cm2)
2H-10 A6 19 8.8 254 25 28.4 (2900) 73.9 (7540) 4200 0.31 33.5 40.5 TK-A1075 1.9(19)
2H-10 A8 19 8.8 254 25 28.4 (2900) 73.9 (7540) 4200 0.31 33.5 39 TK-A1075 1.9(19)
2H-12 A8 23 10.6 304 34 36.7 (3740) 95.8 (9780) 3300 0.70 59.7 62.7 TK-A1291 1.7(17)
2H-15 A8 23 10.6 381 50 46.9 (4790) 119.6 (12200) 2500 2.42 115 129 TK-A1512 1.5(15)
2H-15 A11 23 10.6 381 50 46.9 (4790) 119.6 (12200) 2500 2.34 115 122 TK-A1512 1.5(15)

* The specifications of 2H-A type in the red data.

* Subject to technical changes.

Model-ABBCDD1D2EE1FG max.G max.G min.G min.HJK DefaultK max.LL1L1MNPQ max.Q min.R max.R min.STU
2H-10A6254100120220171.4106.38133.4525758.533.5-10.514.52545M85x2M85x26~M162218431103033.814.35146.640166~M12
2H-10A8254100113220171.4139.72190518758.526.5-10.57.52545M85x2M85x26~M162224431103033.814.35146.640163~M8
2H-12A8304110122220171.4139.7219061891826-1532850M100x2M100x26~M162325511303045.815.861.35650213~M8
2H-15A8381133160300235139.72171.46331201144-12213960
M130x2 / M100x2
M130x2 / M115x2
6~M203024631654347.318.28074.76225.5/226~M16
2H-15A11381133149300235196.872606221201133-12103960M130x2M130x26~M203028631654347.318.28074.76225.5/223~M10

* The dimensions  of 2H-A type in the red data.

Model 2D pdf 2D dwg 3D step
2H-10
2H-10A6
2H-10A8
2H-12
2H-12A8
2H-15
2H-15A8
2H-15A11
I agree