0
Collet Chuck
Thru-Hole
  • PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
  • High clamping accuracy, high speed and high rigidity.
  • The installation is the same as “Thru-hole power chuck” and they are replaceable with each other. 
  • Sealed against swarf, chips and coolant.
  1. The collet used must accord with DIN 6343.
  • Patent numbers :

    Taiwan : PAT.NO.M380842
    China : PAT.NO.ZL201020113762.X

ModelPlunger
stroke
(mm)
Max. Chucking
Capacity (mm)
Round
Max. Chucking
Capacity (mm)
Hexagom
Max. Chucking
Capacity (mm)
Square
Max. D.B.
pull kN
(kgf)
Max.
clamping
force kN
(kgf)
Max. speed
min-1
(r.p.m.)
I
kg‧m 2
Weight (kg)Matching Stell ColletMatching cyl.Max. pressure
MPa (kgf/cm2)
CL-26 4.5 3~26 4~22 4~18 17.6
(1800)
37.9
(3870)
8000 0.040 4.3 161E TK-A533 2.4(24)
CL-30 4.5 3~30 4~26 4~20 19.6
(2000)
42.1
(4300)
8000 0.038 4.2 163E TK-A533 2.7(27)
CL-36 6 3~36 6~32 6~26 22.5
(2300)
48.5
(4950)
6000 0.062 7.0 171E TK-C643 2.3(23)
CL-42 6 3~42 6~36 6~29 24.5
(2500)
52.9
(5400)
6000 0.060 6.9 173E TK-C643 2.5(25)
CL-52 6 5~52 8~45 7~36 27.4
(2800)
59.0
(6020)
6000 0.101 14.3 177E TK-A853 2.0(20)
CL-6017 6 5~60 8~52 7~42 29.4
(3000)
63.7
(6500)
5000 0.098 14.1 185E TK-1068 1.8(18)
CL-6022 6 5~60 8~52 7~42 29.4
(3000)
63.7
(6500)
5000 0.126 16.3 185E TK-1068 1.8(18)
CL-80 6 20~80 18~69 15~56 34.3
(3500)
71.5
(7300)
4000 0.108 17.8 193E TK-A1287 1.6(16)

* Subject to technical changes.

ModelAA1BC(H6)DEE1F max.F min.G max.G minHJK max.LL1
CL-261208510011082.642326372.51512M40x1.53~M10x2516
CL-301208510011082.642330372.51512M40x1.53~M10x2516
CL-36155100120140104.85233637117.520M55x23~M10x2518
CL-42155100120140104.85234237117.520M55x23~M10x2518
CL-52185130145.5170133.4527525932445M60x26~M12x3020
CL-6017185130145.5170133.4527605932445M75x26~M12x3020
CL-6022234130142220171.55326051372445M85x26~M16x3020
CL-80234156163220171.5532802015.59.52245M100x26~M16x3020

Model 2D pdf 2D dwg 3D step
CL-26
CL-30
CL-36
CL-42
CL-52
CL-6017
CL-6022
CL-80
I agree