AUTOGRIP® CB/CB-A Pull Back Collet Chuck - Mainly on NC turning Machines, Special Purpose Machines

Draw Back Collet Chuck

Draw Back type

DRAW BACK type collet chuck used mainly on CNC turning machines, special purpose machines, etc.
Suitable for machining bar material and mandrel.
High clamping accuracy, high speed and high rigidity.
The installation is the same as “Thru-hole power chuck” and they are replaceable with each other.
This is a completely sealed design, which prevents coolant and chips from entering the spindle.
J is the hole diameter of blank draw nut, K is the maximum thread specification, and it could be customized.

Add to inquiry

Catalog Download Manual Download

Model	Plunger stroke (mm)	Max. Chucking Capacity (mm) Round	Max. Chucking Capacity (mm) Square	Max. Chucking Capacity (mm) Hexagom	Max. D.B. pull kN (kgf)	Max. clamping force kN (kgf)	Max. speed min^-1 (r.p.m.)	Weight (kg)	Matching Stell Collet	Matching cyl.	Max. pressure MPa (kgf/cm²)
CB-42	4.5	4~42	7~30	7~36	34.3 (3500)	78.4 (8000)	7000	6.5	RG-42	TK-B846	2.8(28)
CB-42A5	4.5	4~42	7~30	7~36	34.3 (3500)	78.4 (8000)	7000	6.2	RG-42	TK-B846	2.8(28)
CB-42A6	4.5	4~42	7~30	7~36	34.3 (3500)	78.4 (8000)	7000	7.4	RG-42	TK-B846	2.8(28)
CB-52	4.5	4~52	7~45	7~36	39.2 (4000)	92.1 (9400)	7000	6	RG-52	TK-A853	3.2(32)
CB-5217	4.5	4~52	7~45	7~36	39.2 (4000)	92.1 (9400)	7000	9.6	RG-52	TK-A853	3.2(32)
CB-52A5	4.5	4~52	7~45	7~36	39.2 (4000)	92.1 (9400)	7000	6.5	RG-52	TK-A853	3.2(32)
CB-52A6	4.5	4~52	7~45	7~36	39.2 (4000)	92.1 (9400)	7000	7.8	RG-52	TK-A853	3.2(32)
CB-65	4.5	4~65	8~46	8~56	44.1 (4500)	103 (10500)	5500	15.0	RG-65	TK-1068	3.0(30)
CB-65A6	4.5	4~65	8~46	8~56	44.1 (4500)	103 (10500)	5500	13.6	RG-65	TK-1068	3.0(30)
CB-65A8	4.5	4~65	8~46	8~56	44.1 (4500)	103 (10500)	5500	17.6	RG-65	TK-1068	3.0(30)
CB-80	4.5	5~80	8~56	8~68	50.0 (5100)	115 (11730)	5500	19.0	RG-80	TK-A1287	2.3(23)
CB-80A8	4.5	5~80	8~56	8~68	50.0 (5100)	115 (11730)	5500	19.0	RG-80	TK-A1287	2.3(23)

* Subject to technical changes.

Model	-	A	A1	A2	B	C(H6)	D	D1	E	E1	F	G max.	G min.	H	J	K max.	L	L1	M	N
CB-42	-	150	125	102	81.5	140	104.8	-	5	31	43	10.5	6	17.5	30	M55x2	3~M10x25	11	60	4~M8
CB-42	A5	140	125	102	91.5	-	104.8	82.56	-	41.5	43	25.5	21	17.5	30	M55x2	4~M10x25	12	70	4~M8
CB-42	A6	165	125	102	91.5	-	133.4	106.38	-	45	43	29	24.5	17.5	30	M55x2	4~M12x35	18	73.5	4~M8
CB-52	-	150	125	102	83.5	140	104.8	-	5	31.5	53	11	6.5	17.5	30	M60x2	4~M10x25	16	62.5	4~M8
CB-5217	-	180	125	102	87	170	133.4	-	5	35	53	14.5	10	17.5	30	M60x2	4~M12x30	18	66	4~M8
CB-52	A5	140	125	102	93.5	-	104.8	82.56	-	41.5	53	26	21.5	17.5	30	M60x2	4~M10x30	16	72.5	4~M8
CB-52	A6	165	125	102	99	-	133.4	106.38	-	47	53	31.5	27	17.5	30	M60x2	6~M12x35	18	78	4~M8
CB-65	-	185	145	120	100	170	133.4	-	6	50	66	13.5	9	21.5	32	M75x2	6~M12x40	20	73.5	4~M8
CB-65	A6	165	145	120	111	-	133.4	106.38	-	61	66	30.5	26	21.5	32	M75x2	4~M12x40	20	84.5	4~M8
CB-65	A8	207	145	120	107	-	171.4	139.72	-	57	66	26.5	22	21.5	32	M75x2	4~M16x40	24	80.5	4~M8
CB-80	-	235	175	150	112	220	171.4	-	5	37	82.5	13.5	8	25	45	M85x2	6~M16x30	22	87	6~M10
CB-80	A8	210	175	150	125	-	171.4	139.72	-	50	82.5	26.5	21	25	45	M85x2	6~M16x50	24	100	6~M10