0

Short type Rotary Hydraulic Cylinder with Stroke Control

Non-Thru-Hole | Hydraulic

  • For short form, high speed and stroke control.
  • With proximity sensor , the movement of the position is easy to adjust and confirm when operating.
  • Can screw it from the rear end of the cylinder when mounting.
  1. The drain port should be independently connected to oil tank to avoid back pressure.
  2. Stroke Detection Type can be customized to Linear Positioning System.

Specifications

ModelEff. piston area cm2
Extend
Eff. piston area cm2
Retract
Piston stroke
(mm)
Max. speed
min-1 (r.p.m.)
Max. pressure
MPa (kgf/cm2)
I
kg‧m 2
Weight
(kg)
RS-6520N 32.0 28.3 20 6000 4.0(40) 0.01 3.2
RS-6530N 32.0 28.3 30 6000 4.0(40) 0.01 3.3
RS-75N 43.0 37.1 15 6000 4.0(40) 0.01 3.3
RS-7530N 43.0 37.1 30 6000 4.0(40) 0.013 3.7
RS-100N 77.4 71.5 20 6000 4.0(40) 0.04 4.8
RS-125N 121.6 113.1 25 6000 4.0(40) 0.05 7.3
RS-150N 175.6 160.8 30 5500 4.0(40) 0.16 10.6
RS-200N 313.0 290.4 35 5500 4.0(40) 0.29 15.9

Proximity sensor : Model IFS287(IFM) DC 10-30V 100mA NPN .

Dimensions

Subject to technical changes.

ModelABCD1D2E
(h7)
FG max.G min.HJKLL1L2M
(H8)
N
RS-6520N65209780806025452562193M16x2.06~M8x16M6x7014.51730
RS-6530N65309780806025451562203M16x2.06~M8x16M6x8014.51730
RS-75N751510790906530453057188M20x2.56~M8x16M8x60122135
RS-7530N753010790906530451572203M20x2.56~M8x16M8x75122135
RS-100N100201321151008030452572203M20x2.56~M10x20M8x75122135
RS-125N1252516014013011035502582213M24x3.06~M12x20M8x85122545
RS-150N1503019017013011045552595226M30x3.512~M12x24M10x100163245
RS-200N20035245220145120557035115249.5M36x4.012~M16x30M10x125213860

Proximity sensor : Model IFS287(IFM) DC 10-30V 100mA NPN .

Cookies

We use cookies to optimise this website and continuously update it according to your needs. Please click on “Cookies” for detailed information on the use of cookies on this website. If you click “Yes, I agree”, cookies will be activated. If you do not want cookies to be activated, you can opt out here . The settings can be changed at any time under “Cookies”.

I agree