0

Pneumatic Rotary Chuck

Pneumatic Rotary | 3-JAW

  • Rotary chuck with built-in apneumatic cylinder, compact design, suitable for light machining. compatible to standard soft jaw/hard jaw.
  • Can be installed on a rotary table for indexing machining.
  • Sealed against dust and cutting chips.
  • Matching surfaces of all parts hardened, ground and lubricated directly.
  • Note: To overcome friction force between distubritor ring and chuck body, the rotating torque of rotary table must be highr than the requirement shown in the table.

Specifications

ModelJaw stroke
(Dia.)(mm)
Chucking Dia.
Max.(mm)
Chucking Dia.
Min.(mm)
Max. clamping force
(Pneumatic at 6.0kgf/cm2)
kN (kgf)
Max. pressure
(kgf/cm2)
Max. speed
(r.p.m.)
Max Rotation
Reslstance Torque
(Nm)
Air Consumption
(at 6.0 kgf/cm2)
lit (kgf/cm2)
Weight
(kg)
RAP-306 5.5 170 25 21(2141.4) 7 72 40 3.1 16.2
RAP-308 6.8 215 37 34.2(3487.4) 7 60 60 3.1 30.6
RAP-310 7 254 53 48(4894.7) 7 53 85 4.2 42.4

Dimensions

Subject to technical changes.

ModelABB1C (H6)DEFGHJK LL1MNPQ max.Q min.R max.R min.STUVW
RAP-30621598901101551811702575286~M81136732010.754.7539.536.75311219.5143~M8
RAP-3082601131041102002262153285296~M81637952513.258.755753.6351419.5143~M8
RAP-3103001175214023526125454852106~M814421103023.2512.7564.561401619.5143~M8

I agree