Collet chucks

Collet chucks - Thru-Hole - CBE
Thru-Hole

CBE

End stop Collet Chuck

  • End stop clamping.
  • With backgauge block mechanism, positioning and the length control of the workpiece can be more precise.
  • Backgauge block and cover are interchangeable. The chip-proof function can also be achieved.
  • J is the hole diameter of blank draw nut. K is the maximum thread specification and it could be customize.

* Subject to technical changes.

  • Model Plunger stroke
    (mm)
    Max. Chucking Capacity (mm) Max. D.B. pull kN
    (kgf)
    Max.
    clamping force kN
    (kgf)
    Max. speed
    min-1(r.p.m.)
    Weight (kg) Matching Stell Collet Matching cyl. Max. pressure MPa (kgf/cm2)
    Round Square Hexagom
    CBE-42 4.5 4~42 7~30 7~36 34.3(3500) 78.4(8000) 7000 6.0 RG-42 TK-B846 2.8(28)
    CBE-4212 4.5 4~42 7~30 7~36 34.3(3500) 78.4(8000) 7000 6.0 RG-42 TK-B846 2.8(28)
    CBE-42A5 4.5 4~42 7~30 7~36 34.3(3500) 78.4(8000) 7000 6.3 RG-42 TK-B846 2.8(28)
    CBE-42A6 4.5 4~42 7~30 7~36 34.3(3500) 78.4(8000) 7000 7.4 RG-42 TK-B846 2.8(28)
    CBE-52 4.5 4~52 7~30 7~36 39.2(4000) 92.1(9400) 7000 6.9 RG-52 TK-A853 3.2(32)
    CBE-5212 4.5 4~52 7~30 7~36 39.2(4000) 92.1(9400) 7000 6.7 RG-52 TK-A853 3.2(32)
    CBE-5217 4.5 4~52 7~30 7~36 39.2(4000) 92.1(9400) 7000 8.9 RG-52 TK-A853 3.2(32)
    CBE-52A5 4.5 4~52 7~30 7~36 39.2(4000) 92.1(9400) 7000 7.8 RG-52 TK-A853 3.2(32)
    CBE-52A6 4.5 4~52 7~30 7~36 39.2(4000) 92.1(9400) 7000 6.9 RG-52 TK-A853 3.2(32)
    CBE-65 4.5 4~65 8~46 8~56 44.1(4500) 103(10500) 6000 9.3 RG-65 TK-1068 3.0(30)
    CBE-6517 4.5 4~65 8~46 8~56 44.1(4500) 103(10500) 6000 8.6 RG-65 TK-1068 3.0(30)
    CBE-65A5 4.5 4~65 8~46 8~56 44.1(4500) 103(10500) 6000 10.8 RG-65 TK-1068 3.0(30)
    CBE-65A6 4.5 4~65 8~46 8~56 44.1(4500) 103(10500) 6000 9.5 RG-65 TK-1068 3.0(30)
    CBE-65A8 4.5 4~65 8~46 8~56 44.1(4500) 103(10500) 6000 9.5 RG-65 TK-1068 3.0(30)

    Model A A1 A2 B C(H6) D D1 E E1 F G max. G min. H J K max. L L1 M
    CBE-42 150 132 100 95 140 104.8 - 5 20 48 27.5 23 17 45 M55x2 4~M10x25 19.5 58
    CBE-4212 132 132 100 95 120 100 - 5 - 48 27.5 23 17 45 M55x2 4~M10x25 19.5 58
    CBE-42A5 132 132 100 105 - 104.8 82.56 - - 48 37.5 33 17 45 M55x2 4~M10x30 16 68
    CBE-42A6 160 132 100 105 - 133.4 106.38 - 35 48 37.5 33 17 45 M55x2 4~M12x35 18 68
    CBE-52 150 140 107 99 140 104.8 - 5 - 52 22.5 18 17 56 M60x2 4~M10x20 14.5 60
    CBE-5212 140 140 107 99 120 100 - 5 - 52 22.5 18 17 56 M60x2 4~M10x20 14.5 60
    CBE-5217 180 140 107 109 170 133.4 - 6 - 52 31.5 27 17 56 M60x2 4~M12x30 18 70
    CBE-52A5 140 140 107 109 - 104.8 82.56 - - 52 37.5 33 17 56 M60x2 4~M10x30 16 70
    CBE-52A6 160 140 107 109 - 133.4 106.37 - - 52 37.5 33 17 56 M60x2 4~M12x35 18 70
    CBE-65 157 157 122 116 140 104.8 - 6 - 56 40.5 36 17.5 68 M75x2 4~M10x30 18 74
    CBE-6517 180 157 122 114 170 133.4 - 6 24 56 40.5 36 17.5 68 M75x2 4~M12x30 18 72
    CBE-65A5 157 157 122 114 - 104.8 82.56 - - 56 38.5 34 17.5 68 M75x2 4~M10x25 16 72
    CBE-65A6 157 157 122 112 - 133.4 106.38 - - 56 36.5 32 17.5 68 M75x2 4~M12x35 18.5 70
    CBE-65A8 202 157 122 116 - 171.4 139.72 - 38 56 36.5 32 17.5 68 M75x2 4~M16x35 24 74
  • DOWNLAOD

    You can download the outline drawing (in pdf or dwg format) and 3D step here. If you need more information, please contact AUTOGRIP. Thank you.
    Autogrip’s email: sales@autogrip.com.tw

AUTOGRIP MACHINERY CO., LTD.

  • No.229, Sec. 1, Ming Sheng Rd., Pu Hsin Hsiang, Chang-Hua Hsien, 513 Taiwan
  • Tel: +886-4-822-8719
  • / Fax: +886-4-823-5719
Follow us
© 2015 Copyright Autogrip Machinery Co., Ltd. All Rights Reserved.
Design by Taiwan Products, B2BChinaSources, B2BManufactures